The Sandvik Coromant SCGX H10 carbide indexable insert with AL chipbreaker has a square shape with a 7-degree clearance angle, and provides a balance of wear- and shock-resistance for roughing to finishing of aluminum alloys frequently used in the aerospace, automotive, and construction industries. The single-sided positive insert has chip grooves on one side, a hole in the center, and four cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used for external and internal profiling, interrupted cuts, and large lead angles. The insert’s fine-grained carbide is both hard and tough, providing a balance of wear- and shock- resistance for turning of aluminum. The... Less

Heat Shrink Tubing, Length 1200 In., Min. Expanded I.d. 0.875 In., Max. Reduced I.d. 0.437 In., Shrink Ratio 2:1, Wall Thick Nominal Recovered 0.065 In., Material Of Construction Modified Chlorinated Polyolefin, Temp. Range -94 To 250 F, Max. Voltage 600, Color Black, Resists Cut-through, Abrasion, Solvents, Oils, Fuels, Acids, Alkalis, Standards Mil-r-46846, Type I, Class 1; Mil-dtl-23053/1, Class 1, 2; Ams-3623, Package Qty 3

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cell phone Fashion Gadgets Games Home ACC MP3 Music PC Sports Product Description 3/32"x7/32"x1/5" Fiber Motherboard Insulating Washers Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Specification: Product Name Insulating Washers Material Fiber Inner Diameter (Approx.) 2.5mm / 3/32 Outside Diameter (Approx.) 5.5mm / 7/32 Thickness (Approx.) 0.5mm / 1/5 Color Red Weig

The Sandvik Coromant DCGT H13A indexable turning insert with UM chipbreaker has a 55-degree diamond shape (also called rhombic) and a 7-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining non-ferrous materials including aluminum and heat resistant super alloys (HRSAs) in difficult to average machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and two cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated... Less

The Sandvik Coromant DCGX H10 indexable turning insert with AL chipbreaker has a 55-degree diamond shape (also called rhombic) and a 7-degree clearance angle, providing a balance of resistance to shock and wear for finishing aluminum in difficult to good machining conditions. This single-sided positive insert has a countersunk hole in the center, and two cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated carbide provides toughness, hardness, and edge sharpness for a balance of resistance to shock and wear. The DCGX H10... Less

The Sandvik Coromant DCGX H10 indexable turning insert with AL chipbreaker has a 55-degree diamond shape (also called rhombic) and a 7-degree clearance angle, providing a balance of resistance to shock and wear for finishing aluminum in difficult to good machining conditions. This single-sided positive insert has a countersunk hole in the center, and two cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated carbide provides toughness, hardness, and edge sharpness for a balance of resistance to shock and wear. The DCGX H10... Less

Air Cylinder, Double Acting, Non-rotating, 2 In. Bore Dia., 7 In. Stroke, 250 Max. Pressure (psi), Mounting Style Bottom Tap, Cushion Type Adjustable, 1/4 Npt Cylinder Ports (in.), -20 Degrees - 200 Degrees Operating Temp. Range (f), 12.5 Total Length (in.), 785 Max. Load (lb.), Switch Ready Aluminum, Aluminum Body Material, Silver And Black Finish, Aluminum, Chrome Plated Steel, Steel, Aluminum, 5/8 Rod Dia. (in.)

Home ACC MP3 Music PLCC IC Extractor Material Plastic, Metal Fit for PLCC Pins 20 to 84 Pin Size 10 x 7 x 1.4cm / 4" x 2.7" x 0.55"(L*W*T) Color Blue, Silver Tone Net Weight 21g Package Content 1 x PLCC IC Extractor Description: A perfect for repair man, such as TV / DVD / PC technicians or IC workers. Compact PLCC IC Extractor made of stainless steel and plastic materials. Special designed PLCC Extractor for safe remove PLCC and IC from socket without damaged. Adopt metal and shielded plastic to avoid static charge damage IC components. Small hook for easy extracting IC and installation.

The Sandvik Coromant RCMT GC235 carbide indexable insert with M0 and groove chipbreaker styles has a round shape with a 7-degree clearance angle, providing shock resistance during medium machining of stainless steel under difficult conditions. This single-sided positive round insert has a countersunk hole in the center and a cutting edge that provides 4 to 8 indexes depending on depth of cut. It has a 7-degree clearance angle for light cutting forces and side clearance. It offers high edge strength and is appropriate for interrupted cuts and large lead angles. A positive insert has a sharper cutting edge than a negative insert, making it better for internal and external turning. A combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied with... Less

The Sandvik Coromant TCGX H10 indexable turning insert with AL chipbreaker has a triangle shape with a 7-degree clearance angle, providing a balance of wear and shock resistance for finishing of aluminum in difficult to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated carbide provides both a balance of toughness, sharpness, and hardness for both wear- and shock- resistance. The TCGX H10... Less

Air Compressor Pump, Splash Lubricated, Single Stage, 2, 3, & 5 Hp, Free Air Cfm @ Max Pressure 5.1, 8.5, & 8.7, Max Pressure 135 Psi, Oil Capacity 8.5 Oz, Number Of Cylinders 2, Fnpt Outlet 3/8 In, Pump Shaft Dia 3/4 In, Pump Rpm 650, 1020, & 1100, Groove Section A, Groove Quantity 1, Sheave Size @ 1725 Rpm 2, 2.95, & 3.15 In, Bore Dia 2 3/4 In, Stroke 2 In, Cast Iron Construction, Black Powder Coat Finish, Mounting Hole 6 9/16 X 5 7/8 In, Height 10 1/2 In, Width 6 3/4 In, Depth 11 1/4 In

For a Limited Time Get Free Ground ShippingThe XP7HP Features * 4 Stroke engine. * Full EPA and CARB Approval. * Start System: Recoil Start. * Ignition System: Transistorized Magneto. * Air Cleaner: Dual, Semi-dry, Oil Bath. Specifications: * Max Output: 7 HP / 3600 RPM. * Max Torque: 13.2 Nm / 9.7 ft/lb. * Displacement: 196ml, Bore: 68, Stroke: 54. * Shaft Size: 3/4" Dia, 2-3/8" Long, 3/16" Kw, shaft end drilled & tapped w/ 5/16" 24 UNF. * Dimensions: 17.3" L, 16.7" W, 17.12" H. The DuroMax XP7HP engine Features * 4 Stroke engine. * Full EPA and CARB Approval. * Start System: Recoil

The Sandvik Coromant TCMT GC235 indexable turning insert with a choice of UR, UM, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing shock resistance without limiting wear resistance for roughing to finishing of stainless steel in difficult to average machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC235 grade is a combination of carbide and a coating of titanium carbonitride... Less

The Sandvik Coromant TCMT GC4215 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing wear resistance without limiting shock resistance for roughing to finishing of steel in average to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4215 grade is a combination of carbide and a coating of titanium carbonitride... Less

The Sandvik Coromant TCMT GC1115 indexable turning insert with a choice of MM, UM, or MF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing wear resistance for medium machining to finishing of stainless steel in average to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC1115 grade is a combination of carbide and a coating of titanium aluminum nitride (TiAlN) and chromium oxide... Less

The Sandvik Coromant DCGT H13A indexable turning insert with UM chipbreaker has a 55-degree diamond shape (also called rhombic) and a 7-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining non-ferrous materials including aluminum and heat resistant super alloys (HRSAs) in difficult to average machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and two cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated... Less

Compressed Air Filter, Activated Carbon, Npt 3/4 In, Inlet/outlet 3/4, Max Flow 88 Cfm, Filter Rating 0.01 Microns, Max Pressure 235 Psi, Max Temp 77 F, Bowl Type (material) Aluminum, Nanopor Microglass Filter Media, Housing Aluminum, Height 19.6 In, Width 4.8 In, Depth 4.8 In, For Use With Speedaire Compressed Air Filter

The Sandvik Coromant TCMT GC4225 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing a balance of resistance to shock and wear for roughing to finishing of steel in difficult to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4225 grade is a combination of carbide and a coating of titanium carbonitride (TiCN),... Less

The Sandvik Coromant TCMT GC4225 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing a balance of resistance to shock and wear for roughing to finishing of steel in difficult to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4225 grade is a combination of carbide and a coating of titanium carbonitride (TiCN),... Less

The Sandvik Coromant DCGT H13A indexable turning insert with UM chipbreaker has a 55-degree diamond shape (also called rhombic) and a 7-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining non-ferrous materials including aluminum and heat resistant super alloys (HRSAs) in difficult to average machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and two cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. The insert’s uncoated... Less

Pressure Booster Pump, High-volume, Odp, Housing Material Cast Iron, 3/4 Hp, 1 Phase, Voltage 115/230, 14.0/7.0 Amps, 60 Hz, Inlet 1-1/2 In Npt, Outlet 1-1/4 In Npt, Max. Pressure 33 Psi, Suction Lift 25 Ft., Max. Case Pressure 100 Psi, 3450 Rpm, Motor Type Permanent Split Capacitor, Continuous Duty, Closed, Brass Impeller, Seal Material Stainless Steel, Buna, Carbon/silicon Carbide, Max. Liquid Temp. 200f, Max. Fluid Viscosity 31 Ssu, Csa, Cus, Ul Listed, Includes Manual

The Sandvik Coromant TCMT GC235 indexable turning insert with a choice of UR, UM, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing shock resistance without limiting wear resistance for roughing to finishing of stainless steel in difficult to average machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC235 grade is a combination of carbide and a coating of titanium carbonitride... Less

The Sandvik Coromant TCMT GC4225 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing a balance of resistance to shock and wear for roughing to finishing of steel in difficult to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4225 grade is a combination of carbide and a coating of titanium carbonitride (TiCN),... Less

The Sandvik Coromant TCMT GC4215 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing wear resistance without limiting shock resistance for roughing to finishing of steel in average to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4215 grade is a combination of carbide and a coating of titanium carbonitride... Less

The Sandvik Coromant TCMT GC4215 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing wear resistance without limiting shock resistance for roughing to finishing of steel in average to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4215 grade is a combination of carbide and a coating of titanium carbonitride... Less

The Sandvik Coromant TCMT GC4225 indexable turning insert with a choice of PR, UR, PM, UM, PF, or UF chipbreaker style has a triangle shape with a 7-degree clearance angle, providing a balance of resistance to shock and wear for roughing to finishing of steel in difficult to good machining conditions. This single-sided positive insert has chip grooves on one side, a countersunk hole in the center, and three cutting edges. It has a 7-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4225 grade is a combination of carbide and a coating of titanium carbonitride (TiCN),... Less