Building Supplies

Timers

Lamps, radios, televisions, indoor Christmas lights, appliances. 15AMP7 Day 1 Polarized (2-Prong) Outlet

Landscape, Outdoor Christmas Lighting, Other Outdoor Lighting, Energy Saving15 AMP24 Hr (15 min segments)3 Grounded (3-Prong) Outlets

These energy saving commercial timers use no electricity to operate. These timers are designed to replace any standard wall switch, single or multi-gang, and automatically limit the "ON" time of fans, lights, motors, heaters and other energy consuming loads. Time limits of 5, 15, 30 and 60 minutes and 2, 4, 6 and 12 hours are available. The "hold feature" allows the user to override the automatic shut-off function for extended use of the load as required. Rugged time-dial plate takes the abuse encountered in commercial environments. Time saving "up front" terminal connection with teeter type terminals and an easy "press-on" knob design ensure quick and easy installation. Resistive Wattage is 20 Amp 125 VAC 50/60; 10 Amp 250 VAC 50/60; 10 Amp 277 VAC 50/60; Tungsten Wattage is 7 Amp 125... Less

Lamps, radios, televisions, indoor Christmas lights, appliances. 15AMP24 HR (15 min increments)  1 Grounded (3-Prong) Outlet

Lamps, radios, televisions, indoor Christmas lights, appliances. 15AMP24 HR (15 min increments)  1 Polarized (2-Prong) Outlet

Lamps, radios, televisions, indoor Christmas lights, appliances. 15AMP7 Day 1 Grounded (3-Prong) Outlet

Poultry and Livestock, Agriculture, Greenhouses, Oil Well Pumping, Ventilation, Process Control  960 Time Combinations/2 DialsPercentage ON Has 32 Steps 0% to 100% Metal Indoor NEMA 4X Enclosure

Outdoor Security Lighting, Interior Lights for Lived-In Look, Fans and Motors, Appliances10 ON and OFF Set PointsAstronomic (Sunrise/Sunset Timer)Can be used as a 3-Way SwitchRequires a Neutral.

Repeat Cycle Timer, 0-6 min, DPDT - 120 VAC The ACI Twin Setting Repeat Cycle Timer features two timers in one case, acting as a continuously functioning repeat cycle timer. The twin setting repeat cycle timer allows independent setting of both "on" and "off" time. This provides the needed flexibility required for many timing applications. When power is applied to the timer coil, the lead timer immediately begins its time delay. Once the lead timer's delay is reached, the relay contacts transfer and remain transferred until the lag timer's delay setting is reached. The relay contacts are released, both timers are reset and the timing cycle automatically begins. Both the lead and the lag timer can be set at any point from zero to full scale by adjusting the twin knobs. Any pattern of... Less

These energy saving timers use no electricity to operate. These timers are designed to replace any standard wall switch, single or multi-gang, and automatically limit the "ON" time of fans, lights, motors, heaters and other energy consuming loads. Time limits of 5, 15, 30 and 60 minutes and 2, 4, 6 and 12 hours are available. The "hold feature" allows the user to override the automatic shut-off function for extended use of the load as required. Supplied with a molded white, ivory or almond time dial plate designed to fit either toggle or decorator style switch plates; single or multi-gang with no field modifications required to fit either style switch plate. Time saving "up front" terminal connection with teeter type terminals and an easy "press-on" knob design ensure quick and easy... Less

2 ON/OFF Settings per day. Features a weather proof cover, grounded cord, and receptacle. Manual Override Switch. 10 Amp Capacity. 120 Volts AC, 60 Hz.

The EI200 series timers provide silent operation in time ranges from 30 minutes up to 12 hours. Replaces single-pole switches in a variety of applications. Switch ratings - Resistive (heater): 15 amp; 1800 watts; Tungsten (incadescent): 8.3 amp; 1000 watts; Ballast (fluorescent): 8 amp. Not for use with sunlamps, saunas, etc. 8.00 L. 7.00 W. 7.00 H.

Maxxima 800 Watt 7 Button Timer Switch, Set your lights to stay on to one of 6 pre-determined periods of time, to turn off automatically afterwards

These energy saving timers use no electricity to operate. These timers are designed to replace any standard wall switch, single or multi-gang, and automatically limit the "ON" time of fans, lights, motors, heaters and other energy consuming loads. Time limits of 5, 15, 30 and 60 minutes and 2, 4, 6 and 12 hours are available. The "hold feature" allows the user to override the automatic shut-off function for extended use of the load as required. Supplied with a molded white, ivory or almond time dial plate designed to fit either toggle or decorator style switch plates; single or multi-gang with no field modifications required to fit either style switch plate. Time saving "up front" terminal connection with teeter type terminals and an easy "press-on" knob design ensure quick and easy... Less

4 Hr. Twist Timer Ivory W/Hold APPLICATIONS: Control whole house/ventilating fans, appliances, heat lamps, lighting, thermostats. FEATURES & OPERATION: Unit is mechanically spring wound, requiring no electricity to operate. Switch contacts are made when knob is rotated and break circuit at the end of a timed cycle, thereby turning OFF load. CAUTION: This timer is not to be used in precision timing applications where timing could have dangerous consequences (i.e., sun lamp, sauna, etc.)RATINGS: 125VAC, 20AMP inductive/resisti ve125VAC, 7AMP Tungsten125VAC, 1 HP 7.00 L. 4.50 W. 2.50 H.